RAWESS · Knowledge · Technical data

Raw material technical data
before you approve a grade.

A working guide for procurement, formulation, quality and regulatory teams comparing cosmetic raw materials, supplier documents and sample results.

Two suppliers can quote the same INCI and still describe different materials. Compare the identity, assay basis, test panel and commercial terms before you compare price.

Use each technical document for the decision it supports

A technical data sheet (TDS) describes the grade, typical or specified parameters, handling and application guidance. A certificate of analysis (COA) reports results for an identified batch against agreed limits. A safety data sheet (SDS) communicates hazard, handling, storage, transport and emergency information. A product guide or PDF helps a buyer understand the catalogue entry; it is not a batch release document.

Document roles in a raw material qualification file
DocumentCheck it forDo not use it as
TDS / specificationIdentity, supplied form, assay basis, acceptance limits, storage and processing guidance.Evidence that the shipped lot achieved every limit.
Lot COALot number, methods, units, actual results and release decision.Proof that another lot or the finished formula will perform identically.
SDSHazards, PPE, first aid, fire, spill, transport and disposal information.A purity certificate or a finished-product safety assessment.
Product guideCatalogue identity, purchasing questions and the documents to request.A substitute for current COA, TDS, SDS or regulatory review.

Start with the product PDF library for catalogue context, then request the current grade documents from RAWESS technical sales.

Verify identity, composition and assay basis

Record the INCI name, CAS number where applicable, full supplied composition, physical form, carrier or solvent, and the manufacturer or production site named for the offer. For blends, record each declared component and its amount or range. A shared INCI does not establish equal concentration, source, particle form, counter-ion, molecular weight distribution or branded equivalence.

Ask how the number was measured

  • Is the result dry basis, as supplied, on a marker basis, or chromatographic purity?
  • Which method, reference standard, detector and calculation are used?
  • For botanicals, which plant species, plant part, extraction solvent and marker definition apply?
  • For peptides, is the number purity, net peptide content, active sequence, salt form or total blend?
  • For powders, how do water, residual solvent, salts and carrier affect the mass you weigh?

For a purchase comparison, calculate the amount of the intended active delivered per kilogram. Do not turn a typical value into a guaranteed batch result. Ask for the specification and lot COA that will govern acceptance.

Technical references for decisions include the COA, SDS and TDS comparison, the botanical marker versus extract ratio guide and the peptide active-concentration calculation.

Build a lot-release test panel

Agree the test panel before a deposit or sample approval. The correct panel depends on identity, supplied form, use, destination market and the risks your quality agreement assigns to each party.

  • Identity: a method that distinguishes the intended material from a similarly named or substituted grade.
  • Assay or marker: the basis, method, units and acceptance limit, with the relevant calculation.
  • Impurities: residual solvents, water, ash, related substances, pesticides or other risks relevant to the material.
  • Heavy metals: the named elements, method and limits; “heavy-metal tested” without limits is incomplete.
  • Microbiology: total counts, specified organisms and method where the form and use require them.
  • Physical attributes: appearance, colour, odour, particle or mesh size, viscosity, pH or solubility as relevant.

Compare actual results and units, not only a “pass” label. Tie the COA lot to the packing list, shipment lot, retained sample and your incoming-inspection record. The quality and document review page explains how to prepare that file.

Separate raw-material stability from formula stability

Ask for storage temperature, light and oxygen sensitivity, packaging, retest or expiry basis and any transport controls. Then test the material in your intended formula. Raw-material shelf life does not prove stability after dilution, heating, pH adjustment, emulsification, preservation or exposure to air and light.

Record the conditions that change the answer

For solubility or dispersion, record phase, concentration, order of addition, temperature, mixing energy, hydration time and observations. For emulsifiers and thickeners, record oil phase, electrolytes, pH, shear, hydration and viscosity method. For actives and botanicals, record light, oxygen, antioxidant system, packaging and marker method. Compare like with like before replacing a grade.

Use the related guides for solubility and dispersion testing, storage and stability checks and emulsion viscosity troubleshooting.

Qualify the sample before scaling the order

Write the sample request so that the supplier can return a comparable offer: exact grade, quantity, application, destination, target concentration, packaging and required documents. Ask whether the sample comes from a production lot, a development lot or a retained reference. Record its lot number and match the sample COA, SDS and TDS.

  1. Confirm identity and supplied composition.
  2. Check the agreed test panel and actual sample results.
  3. Run the intended formulation trial with a control and record processing conditions.
  4. Review compatibility, appearance, stability, packaging and claim evidence separately.
  5. Approve the grade only after quality, regulatory and commercial reviewers sign the same specification.

A free sample, a short dispatch estimate or a catalogue MOQ does not automatically establish a production commitment. Confirm sample cost, freight, customs, MOQ, lead time and document release in writing.

See the sample evaluation and quotation guide before requesting a pilot pack.

Compare quotations on a delivered-active basis

Put each offer in one row: INCI/CAS and full composition, assay basis, net active per kilogram, pack size, MOQ, lead time, Incoterm, destination, freight, duties, document package, quote validity and payment terms. If one cell is blank, mark it as an open question instead of treating two offers as equivalent.

Minimum fields for a comparable technical-commercial review
TechnicalIdentity, composition, assay method and basis, test panel, storage and transport.
QualityLot linkage, COA limits, sampling plan, complaint window, retest and retained sample.
FormulationStarting use range, compatibility data, process conditions and evidence limits.
CommercialMOQ, pilot quantity, pack, lead time, Incoterm, destination cost and quote validity.
RegulatoryTarget market, exact composition, applicable inventories or restrictions and reviewer sign-off.

For a broader buying workflow, use the cosmetic raw material buying guide. To compare a specific catalogue item, open the product catalogue and then request the current documents for that grade.

Technical data request checklist

Send the following in one enquiry: product or INCI, CAS if applicable, intended use, destination market, target concentration, trial and production quantities, packaging preference, required test panel, COA/SDS/TDS request, sample and freight question, and the name of the person approving quality. This makes the first reply easier to compare and reduces avoidable back-and-forth.

Request grade-specific technical data